Request a Quote

* Required fields










Message / Order details:
Sending...

1-800-794-5883
Translate Mod Tronic Instruments Ltd.
Select Language


Select category

Temperature Sensors

Our MINCO Resistance Temperature Detectors (RTDs), Thermocouples, and Thermistors meet the needs of OEM's and end users

Image Title Description
RTD & Thermocouple Assemblies RTD & Thermocouple Assemblies Standard, easy-to-order assemblies fit a variety of applications. RTDs, Thermocouples, and Transmitters. Hazardous area approvals include CSA, FM, ATEX and IECEx.
RTD & Thermocouple Probes RTD & Thermocouple Probes Tip-sensitive with copper tip (260°C), All stainless (260°C & 500°C), Mineral insulated (600°C). Single and dual elements.
RTD & Thermocouple Sensor Accessories RTD & Thermocouple Sensor Accessories Stainless Steel and brass compression fittings, Spring-loaded holders, Thermowells and Connection Heads
RTD & Thermocouple Mini Bearing Embedment Sensors RTD & Thermocouple Mini Bearing Embedment Sensors Small, rugged RTDs and thermocouples. Install in bearings for early warning of overheating. Bearing embedment or surface mount Bolt-on designs. Single or dual elements.
Stator Winding RTDs and Thermocouples Stator Winding RTDs and Thermocouples Minco stator RTDs meet the specification of ANSI C50.10-1990, general requirements for synchronous motors. Six sensors are recommended for each motor, two per phase.
Thermal-Ribbon™ Flexible RTDs and Thermocouples Thermal-Ribbon™ Flexible RTDs and Thermocouples Thin, flexible surface mount RTDs and thermocouples. Kapton, silicone rubber, Mylar insulation. Response as fast as 0.1 seconds!
Bolt-On Temperature Sensors Bolt-On Temperature Sensors Bolt-on temperature sensors are designed for easy installation in industrial and commercial environments. The sensors can be mounted on machines, against process pipes, or embedded directly into a machined part.
HVAC/R Sensors HVAC/R Sensors RTDs, thermistors, and transmitters. Room air, outside air, duct, and fluid sensors. Platinum and Nickel-iron RTD's, 2252 or 10K ohm thermistors.
RTD Elements RTD Elements Low cost thin-film elements, Wire wound elements. Accurate sensing from -200 to 850°C (-328 to 1582°F)
PTC Thermistors for Electric Motors PTC Thermistors for Electric Motors Reliable PTC thermistors that meet the specifications of DIN 44081 / 44082 provide overheating protection for motors and dynamic monitoring of critical system parameters.

Mod Tronic Instruments Limited
1 Delta Park Blvd #12
Brampton, ON L6T 5G1
Phone: 905-457-6322 or 1-800-794-5883
Fax: 905-457-4716 or 1-800-830-7122
Brampton
Halifax
Regina
Edmonton
905-457-6322
902-422-0978
306-359-1476
780-459-2690
Montreal
Winnipeg
Calgary
Vancouver
514-848-7205
204-895-2038
403-236-2909
604-224-9547

Init - _SESSION: [] Init - paramsURL: {"ext":"products-by-category","id":"14","var":"56"}