Request a Quote

* Required fields










Message / Order details:
Sending...

1-800-794-5883
Translate Mod Tronic Instruments Ltd.
Select Language


Select category

CTE2, SCTE2, CTV2 & SCTV2 Series Current Transducers


CTE2, SCTE2, CTV2 & SCTV2 Series

The Voltage Output Analog Current Sensors are designed for use in any AC current monitoring application in which you are looking to monitor a particular piece of equipment for proper operation. All voltage output current sensors use an “Average” current measuring method and should be used in applications where a pure Sinusoidal AC waveform that has very little or no distortion/noise on the conductor being monitored. Applications may include monitoring a resistive type load such as an incandescent light bulb or heating element as well as any single speed linear load. Voltage Output current sensors are available in both solid and split-core versions which also includes a Patented 35 mm Din Rail mounting foot for easy installation in panel mount applications. The solid-core versions are a great choice for new installations or OEM applications in which cost sensitivity, lower trip points and environmental issues like dust and moisture may be of concern. The split-core version of the current sensors work great in retrofit applications and for use on service technicians vehicles since one or two parts will work in most applications and can be easily installed without disconnecting any wires. For best results, the voltage output current sensors should not be used in applications with switching power supplies or variable speed drives due to the limited operating frequency range. In applications where variable speed drives or waveforms include distortion/noise, ACI recommends the use of the A/CTA2-RMS or A/SCTA2-RMS Series sensors where you need to supply 24 VDC power to the current sensors with a 4-20 mA signal. A 249 Ohm or 499 Ohm 1 Watt resistor can be used to convert the 4-20 mA signal into a useable 1-5 or 2-10 VDC output signal at your building management system or PLC.


Select & Configure Model
Base Model #Case StyleSensing Aperature SizeOutput SignalFrequency RangeResponse TimePower SupplyNormally
In Stock
Configure Part #
 
A/CTE2-50Solid Core 0.75”0 to 5 VDC50 to 600 Hz< 300 msSelf PoweredInquire
A/CTE2-150Solid Core 0.75”0 to 5 VDC50 to 600 Hz< 300 msSelf PoweredInquire
A/SCTE2-50Split Core0.75”0 to 5 VDC50 to 600 Hz< 300 msSelf PoweredInquire
A/SCTE2-150Split Core0.75”0 to 5 VDC50 to 600 Hz< 300 msSelf PoweredInquire
A/SCTE2-250Split Core0.75”0 to 5 VDC50 to 600 Hz< 300 msSelf PoweredInquire
A/CTV2-50Solid Core 0.75”0 to 10 VDC50 to 600 Hz< 300 msSelf PoweredInquire
A/CTV2-150Solid Core 0.75”0 to 10 VDC50 to 600 Hz< 300 msSelf PoweredInquire
A/SCTV2-50Split Core0.75”0 to 10 VDC50 to 600 Hz< 300 msSelf PoweredInquire
A/SCTV2-150Split Core0.75”0 to 10 VDC50 to 600 Hz< 300 msSelf PoweredInquire
A/SCTV2-250Split Core0.75”0 to 10 VDC50 to 600 Hz< 300 msSelf PoweredInquire

Mod Tronic Instruments Limited
1 Delta Park Blvd #12
Brampton, ON L6T 5G1
Phone: 905-457-6322 or 1-800-794-5883
Fax: 905-457-4716 or 1-800-830-7122
Brampton
Halifax
Regina
Edmonton
905-457-6322
902-422-0978
306-359-1476
780-459-2690
Montreal
Winnipeg
Calgary
Vancouver
514-848-7205
204-895-2038
403-236-2909
604-224-9547