Request a Quote

* Required fields










Message / Order details:
Sending...

1-800-794-5883
Translate Mod Tronic Instruments Ltd.
Select Language

Select category

APD 1393 Series RTD to DC Signal Splitters


IsoSplitter RTD to DC Signal Splitter

The APD 1393 IsoSplitter accepts an RTD temperature input and provides two optically isolated and linearized DC voltage or current outputs. The sensor type and temperature range and each independent output range can be specified as required. This provides an economical solution when one temperature signal must be sent to two different devices.


Typical applications include validation, datalogging, output device separation and redundancy (i.e. to prevent failure of the entire loop if one device fails), or a combination of these. The temperature input is linearized, amplified, split, and then passed through an opto-coupler to the output stages. Full 4-way isolation (input, output 1, output 2, power) make this module useful for ground loop elimination, common mode signal rejection, and noise pickup reduction.


Select & Configure Model
Base Model #PowerDescriptionSocketApprovalsNormally
In Stock
Configure Part #
 
APD 139385-265 VAC, 50/60 Hz or 60-300 VDCIsoSplitter 1 temperature input to 2 DC outputs. Fully isolated.N/AUL Listed - USA & CanadaInquire
APD 1393 D9-30 VDC or 10-32 VACIsoSplitter 1 temperature input to 2 DC outputs. Fully isolated.N/AUL Listed - USA & CanadaInquire

Mod Tronic Instruments Limited
1 Delta Park Blvd #12
Brampton, ON L6T 5G1
Phone: 905-457-6322 or 1-800-794-5883
Fax: 905-457-4716 or 1-800-830-7122
Brampton
Halifax
Regina
Edmonton
905-457-6322
902-422-0978
306-359-1476
780-459-2690
Montreal
Winnipeg
Calgary
Vancouver
514-848-7205
204-895-2038
403-236-2909
604-224-9547

Init - _SESSION: [] Init - paramsURL: {"ext":"products-by-category","id":"19","var":"78","var2":"186","var3":"467"}