Programmable DIN Temperature Transmitters
Minco Programmable DIN
The transmitter converts the RTD temperature into a linearized 4 to 20 mA DC current signal. Because this current signal is immune to leadwire and electrical noise, it lets you obtain accurate temperature readings from RTDs thousands of feet away. An ordinary twisted pair of wires carries both the temperature signal and power for the transmitter’s electronics. An LED conveniently indicates the status of the control loop. The brightness is directly proportional to the loop current. A very bright LED indicates an open RTD; a dark LED signals a shorted RTD or loss of current loop power.
• 4 to 20 mA current signal
• Fits standard 35 mm DIN rail
• Field-calibrate to your temperature range
• Optional high-accuracy calibration to Minco RTDs for improved accuracy.
• Optional Input/Output isolation to 600 VRMS
| Base Model # | Max Probe Dia. | Transmitter Type | Input/ Ouput Isolation | Approvals | Ambient Operating Temperature | Sensor Input Type | Normally In Stock | Add to Cart / Configure Part # |
| TT273 | N/A | Programmable DIN - Isolated | 600V(Option) | N/A | -40 to 85°C -40 to 185°F | 2 or 3 wire RTD | Inquire | Configurator |
| TT530 | N/A | Programmable DIN - Isolated | 1500V | FM, CSA ATEX IECEx TR CU (EAC) | -40 to 85°C -40 to 185°F | 2 or 3 wire RTD Thermcouple mV | Inquire | Configurator |
| TT531 | N/A | HART Programmable DIN - Isolated | 1500V | FM, CSA ATEX IECEx TR CU (EAC) | -40 to 85°C -40 to 185°F | 2 or 3 wire RTD Thermcouple mV | Inquire | Configurator |
