Chill-Out Combination Sensor (Freeze-Stat) Temperature Sensors
Minco Chill-OutTM Combination Sensor
- Two sensors in one easily installed package: a solid state low temperature cut-out and an averaging 1000.0 Ω platinum temperature detector (RTD).
- Low temperature cut-out device that replaces the traditional labor intensive vapor filled devices. The Chill-OutTM Combination Sensor has two sensors in one reducing installed costs.
- Environmentally friendly "Green Design" uses solid state sensor construction, eliminating potential leaks and disposal issues with traditional refrigerant vaporfilled capillaries that could harm the environment.
- Solid state design and rugged 3/8" diameter tubing eliminate concerns of gas leaks or kinking of the capillary commonly encountered during the installation of traditional vapor filled devices.
- Mount in any direction—unit is sensitive to temperature changes in any orientation.
- Status LED: (green / red) multifunctional LED. Indicates power on and fault.
- Easily formed aluminum or highly flexible galvanized armor (PVC coated) plenum-rated sensor case.
- Manual reset: selectable latching and non-latching , remote reset may be used with latching mode.
- High and low power relays and adjustable setpoint control circuitry self contained in rugged housing.
- Detachable sensor probe for easy installation. Sensor can be mounted to back of enclosure or side.
- Fail-safe relays change state if power is lost and on startup.
- UL60730 Listed - File E211718.
Select & Configure Model
| Base Model # | Sensing Element or Junction Type | Temperature Range | Sensor Type | Normally In Stock | Add to Cart / Configure Part # |
| AS570PF | PF Platinum 1000 Ω ±0.1% at 0°C (0.00385 TCR) | -45.5 to 80°C (-50 to 176°F) | RTD | Inquire | Configurator |
| AS570TK | TK Thermistor 10,000 Ω ± 1% at 25°C (26.6 R25°C/R125°C) | -45.5 to 80°C (-50 to 176°F) | RTD | Inquire | Configurator |
