Economy / HVAC Thermowells
MINCO Economy / HVAC Thermowells are best for moderate temperatures and pressures.
Thermowells protect probes from pressure, flow, and corrosion. The models on this page have integral fittings for probe and connection head mounting. Immerse the thermowell at least 2.5" (65 mm) for accurate readings. The well should extend beyond the center of the fluid stream without touching the opposite wall. Installation in an elbow or tee may be necessary for sufficient immersion in small pipes.
For fastest time response, Mod-Tronic can furnish thermowells with heat sink compound in the tip. This eliminates the air gap between the probe and inside wall of the well and can reduce time constant by as much as 50%. Order AC101750.
Select & Configure Model
| Base Model # | Body Material | Temprature Range | Process Thread | Conduit Thread | For Probe Diameter | Pressure | Normally In Stock | Add to Cart / Configure Part # |
| TW204U | 300 series stainless steel | Upto 260°C (500°F) | 1/2" - 14 NPT | 1/2" - 14 NPT | 0.188" (4.8 mm) | 1000 psi (69.9) bar | Inquire | Configurator |
| TW201U | 300 series stainless steel | Upto 260°C (500°F) | 1/2" - 14 NPT | 1/2" - 14 NPT | 0.215" (5.5 mm) | 1000 psi (69.9) bar | Inquire | Configurator |
| TW203U | 300 series stainless steel | Upto 260°C (500°F) | 1/2" - 14 NPT | 1/2" - 14 NPT | 0.250" (6.4 mm) | 1000 psi (69.9) bar | Inquire | Configurator |
| TW488U | 316 stainless steel | Upto 260°C (500°F) | 1/2" - 14 NPT | 1/2" - 14 NPT | 0.250" (6.4 mm) with reduced 0.188" Tip | 1880 psi (129.7) bar | Inquire | Configurator |
