Flanged Thermowells
INCO Flanged Thermowells are best for moderate temperatures and pressures.
Flanged thermowells are available in three standard flange sizes: 1.0", 1.5", and 2.0" per ANSI B16.5. Specify U dimension and pressure rating. Immerse the thermowell at least 2.5" (65 mm) for accurate readings. The well should extend beyond the center of the fluid stream without touching the opposite wall. Installation in an elbow or tee may be necessary for sufficient immersion in small pipes. Use Configurator button below to select and configure a part number ⇩
Select & Configure Model
| Base Model # | Body Material | Temprature Range | Process Thread | Conduit Thread | For Probe Diameter | Pressure | Normally In Stock | Add to Cart / Configure Part # |
| TW1219U | 316 stainless steel | Upto 607°C (1125°F) | 1/2" - 14 NPT | None | 0.250" (6.4 mm) | 150 psi (10 bar) to 2500 psi (172 bar) | Inquire | Configurator |
| TW1220U | 316 stainless steel | Upto 607°C (1125°F) | 1/2" - 14 NPT | None | 0.250" (6.4 mm) | 150 psi (10 bar) to 2500 psi (172 bar) | Inquire | Configurator |
