MOD-TRONIC RTD Extension Cables
MOD-TRONIC RTD extension cables are used to connect sensor leadwires to remote instrumentation
Use RTD extension cables to connect sensor leadwires to remote instrumentation. Unless informed otherwise, RTD cable will be supplied in continuous lengths. Ends are not stripped.
- Voltage/Temperature: 600 Volts, 200°C rated
- Conductors: 3 wires twisted, AWG 22 (19/34 AWG strands) Silver plated copper 0.030” nominal OD. (Other AWG size available)
- Conductor Insulation: PTFE Extruded 0.048” OD nominal per HP3-EXBFE
- Conductors Insulation Colors: Red/White/White (IN STOCK) or Red/Red/White (build-to-order)
- Drain wire: Twisted with conductors, AWG 22 (19/34 AWG strands) Silver plated copper 0.030” nominal OD
- Shield: 100% shield, Kapton Foil
- Overall Jacket: PTFE tape, spiral wrapped, White, 0.128” nominal OD
Select & Configure Model
| Base Model # | Type | Number of Conductors | Insulation Type | Colour(s) | Temperature | Leadwire AWG | Normally In Stock | Add to Cart / Configure Part # |
| MT-WCT322FSD-RWW100 | RTD Cable | 3 | PTFE | White/White/Red | 200°C (392°F) | 22 | Yes | |
| MT-WCT322FSD-RWW250 | RTD Cable | 3 | PTFE | White/White/Red | 200°C (392°F) | 22 | Yes | |
| MT-WCT322FSD-RWW500 | RTD Cable | 3 | PTFE | White/White/Red | 200°C (392°F) | 22 | Yes | |
| MT-WCT322FSD-RWW1000 | RTD Cable | 3 | PTFE | White/White/Red | 200°C (392°F) | 22 | Inquire | |
| MT-WCT322FSD-RRW100 | RTD Cable | 3 | PTFE | Red/Red/White | 200°C (392°F) | 22 | Inquire | |
| MT-WCT322FSD-RRW250 | RTD Cable | 3 | PTFE | Red/Red/White | 200°C (392°F) | 22 | Inquire | |
| MT-WCT322FSD-RRW500 | RTD Cable | 3 | PTFE | Red/Red/White | 200°C (392°F) | 22 | Inquire | |
| MT-WCT322FSD-RRW1000 | RTD Cable | 3 | PTFE | Red/Red/White | 200°C (392°F) | 22 | Inquire |
