Stator Winding RTD Sensors
Minco Stator Winding RTD Sensors
Flat, laminated “stick” RTDs fit in slots between stator windings to monitor temperature rise and prevent overheating. The National Electrical Manufacturers Association (NEMA) recognizes embedded detectors as a standard protection for motor and generator insulation. Unlike on-off devices, RTDs provide continuous sensing for earlier warning without unnecessary tripouts. The sensing elements of stator RTDs extend through most of the body length to provide an average temperature reading. This eliminates the danger of a point-type sensor missing a localized hot spot. Six sensors are recommended for each motor, two per phase. Locate sensors near the hottest point of
the windings for best performance. Minco stator RTDs meet the specifications of ANSI C50.10-1990, general requirements for synchronous motors.
Select & Configure Model
| Base Model # | Sensing Element or Junction Type | Class / Temperature Limit | Model Thickness | Leadwires | Normally In Stock | Add to Cart / Configure Part # |
| S103898 | Select in Configurator | Class H: 180°C (356°F) | 0.030" (0.76 mm) | AWG 22 | Yes | ConfiguratorSee Stock Parts |
| S1420PA | PA Platinum 100 Ω ±0.5% at 0°C (0.00392 TCR) | Class H: 180°C (356°F) | 0.030" (0.76 mm) | AWG 30 | Yes | Configurator |
| S8010PD | PD Platinum 100 Ω ±0.1% at 0°C (0.00385 TCR) (Meets EN60751, Class B) | Class H: 180°C (356°F) | 0.030" (0.76 mm) | AWG 30 | Yes | Configurator |
| S100305PD | PD Platinum 100 Ω ±0.1% at 0°C (0.00385 TCR) (Meets EN60751, Class B) | Class H: 180°C (356°F) | 0.030" (0.76 mm) | AWG 18 | Inquire | Configurator |
| S100415PD | PD Platinum 100 Ω ±0.1% at 0°C (0.00385 TCR) (Meets EN60751, Class B) | Class H: 180°C (356°F) | 0.030" (0.76 mm) | AWG 30 | Inquire | Configurator |
| S8010PE | PE Platinum 100 Ω ±0.5% at 0°C (0.00385 TCR) | Class H: 180°C (356°F) | 0.030" (0.76 mm) | AWG 30 | Yes | Configurator |
| S1220CA | CA Copper 10 Ω ±0.2% at 25°C (0.00427 TCR) | Class H: 180°C (356°F) | 0.030" (0.76 mm) | AWG 30 | Yes | Configurator |
| S1240NA | NA Nickel 120 Ω ±0.5% at 0°C (0.00672) | Class H: 180°C (356°F) | 0.030" (0.76 mm) | AWG 30 | Yes | Configurator |
| S7401PA | PA Platinum 100 Ω ±0.5% at 0°C (0.00392 TCR) | Class H: 180°C (356°F) | 0.050" (1.3 mm) | AWG 26 | Inquire | Configurator |
| S8014PD | PE Platinum 100 Ω ±0.5% at 0°C (0.00385 TCR) | Class H: 180°C (356°F) | 0.050" (1.3 mm) | AWG 26 | Inquire | Configurator |
| S8014PE | PE Platinum 100 Ω ±0.5% at 0°C (0.00385 TCR) | Class H: 180°C (356°F) | 0.050" (1.3 mm) | AWG 26 | Inquire | Configurator |
| S7401CA | CA Copper 10 Ω ±0.2% at 25°C (0.00427 TCR) | Class H: 180°C (356°F) | 0.050" (1.3 mm) | AWG 26 | Inquire | Configurator |
| S7401NA | NA Nickel 120 Ω ±0.5% at 0°C (0.00672) | Class H: 180°C (356°F) | 0.050" (1.3 mm) | AWG 26 | Inquire | Configurator |
| S13PA | PA Platinum 100 Ω ±0.5% at 0°C (0.00392 TCR) | Class H: 180°C (356°F) | 0.078" (2.0 mm) | AWG 22 | Inquire | Configurator |
| S11016PD | PD Platinum 100 Ω ±0.1% at 0°C (0.00385 TCR) (Meets EN60751, Class B) | Class H: 180°C (356°F) | 0.078" (2.0 mm) | AWG 22 | Inquire | Configurator |
| S8012PE | PE Platinum 100 Ω ±0.5% at 0°C (0.00385 TCR) | Class H: 180°C (356°F) | 0.078" (2.0 mm) | AWG 22 | Inquire | Configurator |
| S18CA | CA Copper 10 Ω ±0.2% at 25°C (0.00427 TCR) | Class H: 180°C (356°F) | 0.078" (2.0 mm) | AWG 22 | Inquire | Configurator |
| S15NA | NA Nickel 120 Ω ±0.5% at 0°C (0.00672) | Class H: 180°C (356°F) | 0.078" (2.0 mm) | AWG 22 | Inquire | Configurator |
| S8016 | Select in Configurator | Class H: 180°C (356°F) | 0.125" (3.2 mm) | AWG 18 | Inquire | Configurator |
| S1320PA | PA Platinum 100 Ω ±0.5% at 0°C (0.00392 TCR) | Class F: 155°C (311°F) | 0.030" (0.76 mm) | AWG 30 | Yes | Configurator |
| S8009PD | PD Platinum 100 Ω ±0.1% at 0°C (0.00385 TCR) (Meets EN60751, Class B) | Class F: 155°C (311°F) | 0.030" (0.76 mm) | AWG 30 | Inquire | Configurator |
| S8009PE | PE Platinum 100 Ω ±0.5% at 0°C (0.00385 TCR) | Class F: 155°C (311°F) | 0.030" (0.76 mm) | AWG 30 | Inquire | Configurator |
| S1120CA | CA Copper 10 Ω ±0.2% at 25°C (0.00427 TCR) | Class F: 155°C (311°F) | 0.030" (0.76 mm) | AWG 30 | Yes | Configurator |
| S1140NA | NA Nickel 120 Ω ±0.5% at 0°C (0.00672) | Class F: 155°C (311°F) | 0.030" (0.76 mm) | AWG 30 | Inquire | Configurator |
| S7682PA | PA Platinum 100 Ω ±0.5% at 0°C (0.00392 TCR) | Class F: 155°C (311°F) | 0.050" (1.3 mm) | AWG 26 | Inquire | Configurator |
| S8013PD | PD Platinum 100 Ω ±0.1% at 0°C (0.00385 TCR) (Meets EN60751, Class B) | Class F: 155°C (311°F) | 0.050" (1.3 mm) | AWG 26 | Inquire | Configurator |
| S8013PE | PE Platinum 100 Ω ±0.5% at 0°C (0.00385 TCR) | Class F: 155°C (311°F) | 0.050" (1.3 mm) | AWG 26 | Inquire | Configurator |
| S23CA | CA Copper 10 Ω ±0.2% at 25°C (0.00427 TCR) | Class F: 155°C (311°F) | 0.050" (1.3 mm) | AWG 26 | Inquire | Configurator |
| S24NA | NA Nickel 120 Ω ±0.5% at 0°C (0.00672) | Class F: 155°C (311°F) | 0.050" (1.3 mm) | AWG 26 | Inquire | Configurator |
| S11PA | PA Platinum 100 Ω ±0.5% at 0°C (0.00392 TCR) | Class F: 155°C (311°F) | 0.078" (2.0 mm) | AWG 22 | Inquire | Configurator |
| S8011PD | PD Platinum 100 Ω ±0.1% at 0°C (0.00385 TCR) (Meets EN60751, Class B) | Class F: 155°C (311°F) | 0.078" (2.0 mm) | AWG 22 | Yes | Configurator |
| S8011PE | PE Platinum 100 Ω ±0.5% at 0°C (0.00385 TCR) | Class F: 155°C (311°F) | 0.078" (2.0 mm) | AWG 22 | Inquire | Configurator |
| S3CA | CA Copper 10 Ω ±0.2% at 25°C (0.00427 TCR) | Class F: 155°C (311°F) | 0.078" (2.0 mm) | AWG 22 | Yes | Configurator |
| S4NA | NA Nickel 120 Ω ±0.5% at 0°C (0.00672) | Class F: 155°C (311°F) | 0.078" (2.0 mm) | AWG 22 | Yes | Configurator |
| S8015 | Select in Configurator | Class F: 155°C (311°F) | 0.125" (3.2 mm) | AWG 18 | Inquire | Configurator |
